|
Portable
Studwelders: The
Studhorse 1200
The
Studhorse 1200 is a lightweight, 80 lb.
portable inverter drawn arc studwelder. Full
Base Stud Capacity: minimum 1/8 “ (3 mm) to maximum 5/8 (16
mm). For more information about
the features of our portable studwelder, The Studhorse 1200
, please click below:
Go
to The Studhorse Product Features page
|
|
|
| ·
Constant Power output |
| ·
Regulated
output |
| ·
Automatic
line voltage compensation |
| ·
5
zone thermal protection |
| ·
Step-less
weld power and time adjustment |
| ·
Short
circuit protected |
| ·
Inverter-smooth arc |
| ·
Digital
start/stop, no contactor |
| |
|
| Specifications: |
| · Input
power requirement. |
· Stepless
0.02 to 1.2 seconds |
| ·
Voltage 400V, 480V or 575V, three phase |
· Current
control 200A – 1200A (0.5 – 33 Kw) |
| · Fusing
100/60/30 time delay |
·
Height 18“ (455 mm) |
| · Output
1200A |
· Width
10.5“ (105 mm) |
| ·
Duty cycle @1200 amps |
· Length
19.5“ (495) mm) |
| ·
5/min for 5/8 studs |
· Weight
80lb (36.5 kg) |
·
Open circuit voltage up to 70V
(adjustable upon request) |
·
Designed for 1200A @ 60 ft 2-0 cable |
| · Timer
control |
|
